LicenseReady CDL Permit Practice

HomePracticeAir Brakes › Question 41

Air Brakes Practice Question 41

Restriction L if not passedAir Brakes · Question 41

A 'full brake application' is performed during inspection by:

  • APressing the pedal lightly
  • BPressing the pedal firmly to the floor and holding
  • CReleasing all air
  • DCycling the parking brake

Correct answer: B. Pressing the pedal firmly to the floor and holding

Why: A full application during inspection lets you check chamber stroke, slack adjuster travel, and audible leaks. Never perform full applications at speed except in true emergencies.

How this question fits the Air Brakes test

An air brake failure on a loaded combination vehicle can cause runaway, jackknife, or fire. The CDL Air Brakes test exists because air systems behave very differently from hydraulic brakes — drivers must understand pressure build, air loss tolerance, and stopping distance under load.

Study technique for this topic

Memorize the seven steps of the air brake pre-trip check, the leak-down rates for single and combination vehicles, the warning signal pressure threshold, and the spring brake automatic application pressure range. Practice the order of operations — never rely on muscle memory in the booth.

Related Air Brakes practice questions

Continue your CDL preparation

The Air Brakes portion of the CDL knowledge exam covers more than this single question. Use this site's full Air Brakes bank to drill every topic, then test yourself with one of our state-specific practice sets to confirm you are ready for the actual DMV exam in your state. Always check your state's CDL handbook for any local addenda before the test day.

If you are still building your overall CDL foundation, start with the General Knowledge bank — every CDL applicant must pass it — and then work outward to the endorsements you plan to add.